APBABY1 Baby seat alarm system

SKU:APBABY1

$94.00



In Stock


Calculate Shipping

Have you ever worried about accidentally leaving your child in the car? New parents have a lot on their minds and live busy lives, so accidents can occur sometimes.

The Aerpro APBABY1 Baby Alarm System is a must have in-car accessory for new parents. With Advanced Two-Way Alarm Trigger Technology, if a child is in their baby seat when the driver unbuckles their seatbelt or turns off the vehicle ignition, an alarm and indicator light will be activated immediately, reminding the driver the baby is still in the vehicle. Additionally the APBABY1 will also alert the driver if a child gets out of the seat while the vehicle is in motion.

Simple to install, the kit comes supplied with a battery powered sensor pad that sits under the baby seat cushion, a seat belt sensor that connects to the driver’s seat belt, an accessory plug wireless receiver that has a built in alarm and indicator light, as well as a second indicator light that can be mounted on the dashboard in the vehicle.

Avoid tragedy and alleviate your worries by installing the APBABY1 into your vehicle today!


VIDEOS
FEATURE VIDEO


  • SAFETY WARNING: This product contains Button / Coin Cell Batteries. Keep batteries out of reach of children. If you suspect a battery has been swallowed or placed inside any part of the body seek medical attention immediately as batteries can cause severe or fatal injuries in 2 hours or less.

Features: 

  • Reminds you a child is still in the vehicle when you park the car
  • Alerts you if a child gets out of their seat while the vehicle is in motion
  • Advanced Two-Way Alarm Trigger System will activate when the vehicle ignition is turned off or when the driver unbuckles their seatbelt
  • Visual and audible alert, including a dashboard mount warning light for easy viewing
  • Simple installation, just place the seat sensor under the baby seat cushion, plug in the receiver to the accessory socket in the vehicle and place the LED warning light on the dash board
  • Wireless Transmission, the sensor is battery operated and transmits wirelessly to the accessory plug receiver
  • Additional USB Charge Ports including standard 2.4A USB, QC3.0 Quick Charge USB and 2.4A Type C ports, for charging other devices such as smartphones via the accessory socket in the vehicle

Specs: 

  • SEAT SENSOR PAD:
    • WORKING VOLTAGE: DC 6V (2x CR2016)
    • WORKING CURRENT: <10uA
    • WORKING FREQUENCY: 433.92 +/-0.5MHz
    • WORKING TEMPERATURE: -20C - +60C
  • ACCESSORY PLUG WIRELESS RECEIVER:
    • WORKING VOLTAGE: DC 9 - 16V
    • WORKING CURRENT: <100MA
    • WORKING FREQUENCY: 433.92 +/-0.5MHz
    • ALARM VOLUME: 70 - 90dB
    • WORKING TEMPERATURE: -20C - +60C
  • USB OUTPUTS:
    • USB1 OUTPUT INTERFACE: Support QC3.0 - DC5V/2.5A, DC9V/2A, DC12V/1.5A
    • USB2 OUTPUT INTERFACE: 5V/2.4A
    • TYPE-C OUTPUT INTERFACE: 5V/2.4A
  • INCLUSIONS:
    • 1 X SEAT SENSOR PAD
    • 1x ACCESSORY PLUG WIRELESS RECEIVER
    • 1x USB POWERED LED INDICATOR LIGHT
    • 1x SEAT BELT BUCKLE SENSOR
    • 1x PRODUCT MANUAL

(APBABY1)