Uniden X85 BUNDLE - X85 DIN Mount UHF CB Radio + AT850BK 6.6 dBi Antenna

The Uniden X85 BUNDLE pairs the X85 DIN-size UHF CB radio with the AT850BK elevated feed 6.6 dBi fibreglass whip - a long-range, truck-ready UHF setup.

The X85 is purpose-built for professional drivers who need reliable communication on the open road. Designed to fit seamlessly into truck dashboards, it combines rugged performance with a clean, integrated look. Master Scan technology keeps communication uninterrupted, and the Instant Replay function records up to 20 minutes of audio so you never miss a message. The oversized LCD screen gives clear visibility day or night, while 100 user-programmable RX channels let you tailor the radio to any route or fleet.

Smart Mic technology includes a 3-way Smart Key for instant access to Instant Channel, Call and Menu, and the magnetic mount keeps the handpiece secure and within easy reach. Dual speakers in the base and microphone give powerful, clear sound in noisy truck cabins, with an external speaker jack at the rear. Supporting both 12 V and 24 V DC systems, the X85 suits any truck configuration with minimal installation effort.

The AT850BK is an elevated feed fibreglass whip with a heavy duty stainless steel spring. Engineered for all-round use on flat terrain, in town and country, it is ground independent with 6.6 dBi gain and 4.5 m low loss coax, and built for heavy use in tough conditions and off-road environments.

Bundle Includes

• X85 – DIN Mount UHF CB Mobile with Remote Speaker Mic
• AT850BK – Elevated Feed and Fibreglass Whip - Black (6.6 dBi Gain)

Features

• X85: DIN-size 5 W UHF CB radio - ideal for trucks
• X85: Instant Replay up to 20 minutes, Master Scan, Triple Watch
• X85: Smart Mic with 3-way Smart Key and magnetic handpiece mount
• X85: oversized LCD, dual speakers, external speaker jack, PA support
• X85: 80 channels + 100 user programmable RX channels, 12/24 V
• AT850BK: elevated feed fibreglass whip, 6.6 dBi gain, black
• AT850BK: heavy duty parallel stainless spring, 889 mm, 4.5 m coax

X85 Features

• DIN size UHF radio - ideal for trucks
• Master Scan technology
• Instant Replay function - up to 20 minutes
• Oversized LCD screen with brightness control
• 100 user programmable RX channels (extra receive only)
• Smart Mic technology with 3-way Smart Key (instant channel, call function and menu)
• Magnetic mount for handpiece
• 80 channels
• Triple Watch
• External speaker jack (rear of unit)
• Dual speakers - base and speaker microphone
• 12 V / 24 V DC
• Voice scramble
• 5 watts transmission power
• Noise reduction circuit (NRC) / active noise cancellation (ANC)
• CTCSS / DCS codes
• Signal strength and RF power meter
• Instant channel programming
• Open / group scan with priority watch
• Duplex capabilities
• Key beep on/off
• Built-in selective calling (SELCALL)
• Call tones: transmit up to 10 different calling tones
• Rotary VOL / SQ / channel select knob
• Roger beep
• Busy channel lock-out
• Public address (PA) speaker support

AT850BK Features

• Elevated feed and fibreglass whip with black heat shrink
• 6.6 dBi gain
• Highly flexible whip
• Heavy duty parallel style stainless steel spring
• Length 889 mm
• Ground independent
• 4.5 metres low loss coax cable
• Terminated FME female connector and PL259 adaptor
• Suits sedan, trucking and 4WD; lightweight, good all purpose

Specifications

X85 Specifications

AT850BK Specifications

What's in the Box

• 1 x X85 UHF radio (with speaker mic)
• 1 x DIN mount sleeve
• 1 x Magnetic mount
• 1 x DC power cord with fuse
• 1 x AT850BK antenna with 4.5 m coax cable
• 1 x PL259 adaptor

Warranty

X85: 5 years (accessories 1 year); AT850BK: Not stated by Uniden. Uniden Australia manufacturer warranty.

CH22 & CH23 are used for telemetry and telecommand applications; voice communications are not permitted on these channels and transmission is inhibited. CH61, 62 & 63 are for future use and are receive only channels. Specifications subject to change without notice.