Stedi WIRQKFT-SMART Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring

Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring

This dual-output SMART harness connects driving lights to the vehicle's high-beam circuit. Its microprocessor automatically detects positive or negative switching. The supplied HB3 and H4 piggyback adapters allow compatible high-beam connections without cutting or soldering the vehicle wiring. Driving lights operate with high beam, while the waterproof push-button switch provides isolation. STEDI identifies this arrangement as ADR compliant.

The loom uses 10AWG cable, UV-rated insulation, protective cable covering and a wrapped relay. DTP outputs and the included DTP-to-DT reducers support the connector types identified in the specification. A 60A relay and 35A fuse are supplied, and the published maximum harness load is 35A at 12V.

STEDI lists cable segments of 2.4m from relay to switch, 2.0m from driving-light connector to relay, and 2.0m from HB3/H4 adapter to relay. A suitable additional adapter may be needed for headlight connections other than the supplied HB3/H4 types.

Tech Specs

What's Included

• 1 x STEDI™ SMART Harness™
• Dual Output with DTP connector
• DTP to DT Reducers
• HB3 + H4 Piggy Back Adaptors
• Waterproof Switch
• Instruction Leaflet