Stedi ST-31-DTP-004 4x Connector (Quad) Plug & Play SMART Harness™ High Beam Driving Light Wiring

4x Connector (Quad) Plug & Play SMART Harness™ High Beam Driving Light Wiring

This quad-output SMART harness supports up to four driving lights through four two-pin DTP Deutsch connectors. It uses heavy-duty 10AWG cable and automatic positive/negative switching detection for high-beam-triggered lighting. The quick-connect arrangement is designed for installation without cutting or soldering.

The source lists dual relay operation with two 80A relays, two 45A fuses and approximately 2.0m of cable from the relays to the light connectors. UV-rated insulation, an illuminated dime switch, cable ties and a wiring diagram are listed for the kit. The connector specification identifies DT and DTP connections.

Tech Specs

What's Included

• 1 x 4 Output DT-P Harness
• 2 x 80A Relay
• 2 x 45A Fuse
• 1 x 0.78" Dime Switch (red illumination)
• 1 x Cable Ties
• 1 x Wiring Diagram

Warranty

Manufacturer rating discrepancy

STEDI's specification table lists a maximum load of 70A at 12V DC, while the description states 75A. The source does not resolve this difference. Confirm the harness capacity with STEDI before selecting an electrical load.