Stedi ST-31-DT4-004 4x Connector DT-4 Plug & Play SMART Harness™ High Beam Driving Light Wiring

4x Connector DT-4 Plug & Play SMART Harness™ High Beam Driving Light Wiring

This quad-output SMART harness supports up to four lights through four four-pin DT-4 Deutsch connectors. The connector configuration supports the DRL functions described for compatible lights. STEDI lists 20A-rated connectors, 10AWG cable and automatic positive/negative switching detection.

The high-beam-triggered quick-connect arrangement is designed for installation without cutting or soldering. The source lists two 80A relays, two 45A fuses and approximately 2.0m of cable from the relays to the connectors. UV-rated insulation, an illuminated dime switch, cable ties and a wiring diagram are included in the published kit information.

Tech Specs

What's Included

• 1 x 4-way Output DT-4 Harness
• 2 x 80A Relay
• 2 x 45A Fuse
• 1 x 0.78" Dime Switch (red illumination)
• 1 x Cable Ties
• 1 x Wiring Diagram

Warranty

Manufacturer rating discrepancy

STEDI's specification table lists a maximum load of 70A at 12V DC, while the description states 75A. The source does not resolve this difference. Confirm the harness capacity with STEDI before selecting an electrical load.