Rockford Fosgate T1S1-12 Power 12" T1 Slim Single 1-Ohm Subwoofer

SKU:T1S1-12

RRP $1,039.00
$839.00
SAVE $200.00 (19%)



In Stock


Calculate Shipping

The Power T1S1-12 is a slimline 12" subwoofer designed for spaces where traditional-sized woofers will not fit. Features a single 1-ohm voice coil.

Overview

Need bass but don't have a lot of space? How about more power handling than your average shallow subwoofer? Well, the T1 "Slimline" subwoofers are not your average shallow, in fact, they have been painstakingly designed to near exact performance characteristics of traditional sized Power T1 subwoofers you're already familiar with. We're calling these "slim" subwoofers because they don't take a lot of depth and offer bass response similar to a traditional sized model. How can this be true? Well, let's just say the Wizards-of-Fos engineered an ingenious slotted voice coil assembly that exhibits long excursion travel. Don't worry, you don't need to understand how it works, you just have to listen to how awesome they sound!

Key Features

  • Injection molded foam surround with VASTâ„¢
  • Dual Nomex progressive spiders with stitched tinsel leads
  • Diecast aluminum frame with integrated heat sink fins
  • Custom 10 AWG slot loaded brass push spring terminals with corrosion resistant tin plating
  • Dual wound 2.5" CCA voice coil with interior/exterior windings
  • Detachable die cast aluminum trim ring
  • Vented pole piece
  • Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
  • High temp, high energy Neodymium motor structure
  • Optional protective grille insert available
  • Optimized for sealed enclosures

Warranty

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.

(T1S1-12)

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.

  • Injection molded foam surround with VASTâ„¢
  • Dual Nomex progressive spiders with stitched tinsel leads
  • Diecast aluminum frame with integrated heat sink fins
  • Custom 10 AWG slot loaded brass push spring terminals with corrosion resistant tin plating
  • Dual wound 2.5" CCA voice coil with interior/exterior windings
  • Detachable die cast aluminum trim ring
  • Vented pole piece
  • Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
  • High temp, high energy Neodymium motor structure
  • Optional protective grille insert available
  • Optimized for sealed enclosures
Model T1S1-12
Size 12"
Fs (Hz) 36
Subwoofer Type Shallow
Speaker Connector 10 AWG slot loaded
Nominal Impedance 1-Ohm
Sd (cm 2 ) 560
Vas (Liters) 32.4
Re (Ohms) 0.9
Qms 11.22
Qts 1.06
Qes 1.17
Magnet Weight (oz) 14.42 oz. (0.41 Kg)
Voice Coil Type Single Voice Coil
SPL (dB @ 2.8v/1m) 88
Power Handling (Watts RMS) 600 Watts RMS / 1200 Watts Max
Le (mH) 0.31
Cutout Diameter 11.22 in. (285 mm)
SPL (dB @ 1w/1m) 85
Xmax (mm) 15
Mounting Depth 3.01 in. (76.5 mm)
Voice Coil Diameter 2.98" (75 mm)
Shipping Weight 16.15 Lbs. (7.3 Kg.)
Woofer Displacement 0.042 cu. ft. (1.2 Liters)
Sealed Box Volume (Vb) 1.1 cu. ft. (31.1 Liters)
Vented Box Volume (Vb) 2.0 cu. ft. (56.6 Liters)