Rockford Fosgate T1D410 Power 10" T1 4-Ohm DVC Subwoofer

Rockford Fosgate T1D410 Power 10" T1 4-Ohm DVC Subwoofer

SKU:T1D410

RRP $919.00
$789.00
SAVE $130.00 (14%)


In Stock
Add To Compare

Calculate Shipping

Innovative technologies allow the T1D410 subwoofer to perform like a larger woofer over the previous model. The T1 10” features dual 4-Ohm voice coils, 600 Watts RMS power handling, and includes a grille with integral trim ring.

Overview

The Power Series T1D410 Dual 4-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D410 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D410 is here!

Key Features

  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Optimized pole piece and spider venting
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Rigid die-cast aluminum basket
  • Anodized aluminum voice coil former / copper clad aluminum wire

Warranty

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.

(T1D410)

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.
  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Optimized pole piece and spider venting
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Rigid die-cast aluminum basket
  • Anodized aluminum voice coil former / copper clad aluminum wire
ModelT1D410
Power Handling (Watts RMS)600 Watts RMS / 1200 Watts Max
Nominal ImpedanceDual 4-Ohm
Magnet Weight (oz)100 oz. (2.84 kg)
Size10"
Voice Coil Diameter3" (75.4mm)
SPL (dB @ 1w/1m)83
Fs (Hz)36
Woofer Displacement0.078 cu. ft. (2.2 Liters)
Qes0.73
Cutout Diameter9.0625 in. (230 mm)
Qts0.65
Sd (cm 2 )345
Shipping Weight25.7 Lbs. (11.65 Kg.)
Mounting Depth6.375 in. (161.9 mm)
Speaker ConnectorCompression Terminal
Qms5.70
Vas (Liters)15.7
Xmax (mm)16
Re (Ohms)6.50
Le (mH)2.5
Subwoofer TypeStandard
Voice Coil TypeDual Voice Coil
Sealed Box Volume (Vb)0.75 cu. ft. (21.2 Liters)
Vented Box Volume (Vb)1.5 cu. ft. (42.4 Liters)