Rockford Fosgate T1D212 Power 12" T1 2-Ohm DVC Subwoofer

Rockford Fosgate T1D212 Power 12" T1 2-Ohm DVC Subwoofer

SKU:T1D212

RRP $889.00
$759.00
SAVE $130.00 (15%)


In Stock
Add To Compare

Calculate Shipping

Innovative technologies allow the T1D212 subwoofer to perform like a larger woofer. The T1 12” features dual 2-Ohm voice coils, & 800 Watts RMS power handling.

Overview

The Power Series T1D212 Dual 2-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D212 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D212 is here!

Key Features

  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Optimized pole piece and spider venting
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Rigid die-cast aluminum basket
  • Anodized aluminum voice coil former / copper clad aluminum wire

Warranty

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.

(T1D212)

1 year manufacturer's warranty (stated on the Rockford Fosgate product page). In Australia, warranty is handled through the authorised Rockford Fosgate distributor; proof of purchase required.

  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Optimized pole piece and spider venting
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Rigid die-cast aluminum basket
  • Anodized aluminum voice coil former / copper clad aluminum wire
Model T1D212
Size 12"
Nominal Impedance Dual 2-Ohm
Mounting Depth 6.75 in. (171 mm)
Shipping Weight 33.3 Lbs. (15.10 Kg.)
Magnet Weight (oz) 123 oz. (3.48 kg)
Voice Coil Diameter 3" (75.5 mm)
Speaker Connector Compression Terminal
SPL (dB @ 1w/1m) 85
Le (mH) 1.8
Qts 0.52
Qms 4.50
Vas (Liters) 55.8
Xmax (mm) 16
Fs (Hz) 28
Qes 0.59
Cutout Diameter 11.25 in. (285 mm)
Woofer Displacement 0.106 cu. ft. (3.0 Liters)
Sd (cm 2 ) 548
Re (Ohms) 3.25
Power Handling (Watts RMS) 800 Watts RMS / 1600 Watts Max
Subwoofer Type Standard
Voice Coil Type Dual Voice Coil
Sealed Box Volume (Vb) 1.25 cu. ft. (35.3 Liters)
Vented Box Volume (Vb) 1.75 cu. ft. (49.5 Liters)