Pioneer DMH-AP8850BT 10" head unit & Aerpro AKTO37 to suit Toyota Kluger 2014-2019

The Ultimate In-Car Entertainment Upgrade to suit Toyota Kluger 2014-2019, pairing the Pioneer DMH-AP8850BT 10-inch head unit with the Aerpro AKTO37 installation kit.

Pioneer DMH-AP8850BT Head Unit Highlights

The Pioneer DMH-AP8850BT is the entertainment centre of this package. Its verified functions include: 10-inch WSVGA capacitive touchscreen; Wireless and wired Apple CarPlay and Android Auto; Bluetooth hands-free calling and audio streaming; WebLink Cast smartphone mirroring. Vehicle-specific kit contents and retention details are listed separately below.

• 10-inch WSVGA capacitive touchscreen
• Wireless and wired Apple CarPlay and Android Auto
• Bluetooth hands-free calling and audio streaming
• WebLink Cast smartphone mirroring
• Ultra-shallow chassis for flexible installation

Pack Contents

• Pioneer DMH-AP8850BT 10-inch head unit
• Aerpro AKTO37 installation kit
• Aerpro APP8PIO9 head-unit-to-ISO harness

Fascia Kit and Vehicle Integration

The Aerpro AKTO37 9/10" Installation Kit comes with all of the components required to install a 9/10" trapezoid shaped radio into your Toyota Kluger (2014-2019) vehicles whilst maintaining important vehicle features such as Steering Wheel Control functionality. Head unit ISO harness is not included in the kit. Recommended to be installed with an Aerpro APP8 Head Unit Secondary ISO Harness (sold separately).

Aerpro Kit Inclusions

• Black Facia Kit
• Steering Wheel Control Interface Harness
• SWC Patch Lead
• Adaptor to allow for 9" and 10" radios to be installed
• Antenna Adaptor
• Camera Retention Adaptor
• Factory USB Retention Harness

Vehicle Feature Retention

• Steering Wheel Controls: Yes (including phone button)
• Factory Reverse Camera: Yes (if equipped)
• AUX Input: Yes
• USB Input: Yes
• Parking Tones: N/A
• Factory Amplifier: No
• Vehicle Menu: No
• Other

Important Fitment Information

• This kit is developed to suit universal trapezoid shaped radios. It will not suit standard DIN or double DIN sized radios
• This kit does not support Pioneer CAN Bus features but comes with a steering wheel control adapter. Instead of selecting 'CAN Bus Adapter' on boot-up, go to the Menu and select 'Steering Wheel Control' > 'With Adapter'.
• The facia kit is designed for left hand drive (LHD) vehicles. The kit will fit without modification however it is recommended to remove the clip at the bottom behind the factory silver trim to prevent the factory panel from bowing slightly.
• Feature Retention will be radio dependent.

Compatible Vehicles

• Toyota Kluger 2014-2019

Confirm the listed vehicle, year range and factory-audio configuration before ordering.