Pac LPA-E4 Active 4CH Line Output Converter with Auto Turn-on

The LOC PRO Advanced can be sued to add amplifiers to a factory audio system that does not have RCA outputs or when replacing the OEM radio and wanting to retain older analogue amplified systems.

Features Include:

• Variable Gain Controls
• Clipping Indicators
• Selectable Ground Isolation
• Load Select Feature 
• Remote Turn On 

All About That Bass

With its built in selectable filter, the LPA-2.4 allows for 250Hz low pass filter of the rear RCA output channels.

A variable 45Hz bass boost EQ is adjustable when the LPF is enabled up to 12dB for maximum bass output.

4/2 IN = 4 OUT

The PAC LPA-E4 features great flexibility for installations with unique output options.

With selectable input of 2 channels or 4 channels high level (speaker) input, the LPA-E4 comes with a pair of 2 channel RCA outputs for a total of 4 channels output.

Great when using 

Mono block and 2 channel amplifier
4/5 channel amplifier (fading if 4CH input)
 

What Do You Get?

The LPA-E4 includes 

• Line Out Converter
• 2x Connector Bricks
• Mounting Screws
• Instruction Card
• Bass Controller (CH3/4) with Mounting Bracket 

Features

• 4CH High Level Input (40v Maximum @ 20k Ohm)
• 4CH Low Level (RCA) Output
• Selectable 250Hz Low Pass Filter
• Adjustable 0dB -12dB Bass Boost
• Single Stereo Gain Pot Control Per Output
• Selectable Grounding Options (Common Ground, Isolated or 200Ohm)
• Selectable Input Load Level (20ohm, 60Ohm or 20k Ohm)
• Clip Indicator
• Automatic Remote Turn-On (Remote input and DC)
• Up to 9.5v RCA Preout
• Removable Quick Connect Brick Connectors
• Wide Range DC Offset
• 4 Channel IN & 4 Channel Out Unfiltered OR 2 Channel IN & 4 Channel Out Unfiltered