Morel Hybrid MW5 MKII 5.25" Midbass Woofers

Morel Hybrid MW5 MKII 5.25" Midbass Woofers

Seen it cheaper? We will negotiate! Call Now!

SKU:HYBRIDMW5MKII

$1,049.00


In Stock
Add To Compare

Calculate Shipping

Standard Shipping - $0.00
Shipping with Signature

Overview

All of the Hybrid MW models incorporate Morel’s core technologies. A 2 ¼” Aluminum Hexatech External Voice Coil wound on an aluminum former enables stable, efficient and linear piston-like movement which effectively reduces distortion levels.

Morel’s optimized one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, creating a realistic three-dimensional sound presentation.

The new Hybrid woofers’ suspension improves the mechanical movement and stability of the membrane, attributing it to very low distortion level at high power and better low frequency dynamic range.

Features

  • Nominal Impedance (ohm) 4: 4
  • Power Handling Wrms: 120 W
  • Max. Trans. Pwr Handling Wrms: 500 W
  • Sensitivity (2.83 V/1M) dB: 90
  • Frequency response Hz: 45 - 3000
  • Voice Coil Diameter mm (inch): 54 (2.1)
  • Cone Type: One-piece formed

In the box

  • 2 x woofers (pair)

(HYBRIDMW5MKII)

Manufacturer Specifications

Nominal Impedance (ohm) 4 4
Power Handling Wrms 120
Max. Trans. Pwr Handling Wrms 500
Sensitivity (2.83 V/1M) dB 90
Frequency response Hz 45 - 3000
Resonant Freq. Fs Hz 56
Voice Coil Diameter mm (inch) 54 (2.1)
Voice Coil Height mm (inch) 10.50 (0.41)
Voice Coil Type/Former Aluminium
Voice Coil Wire Hexatech™ Aluminium
DC Resistance (ohm) 3
Voice Coil Induct. @1 kHz (mH) 0.21
Magnet System Hybrid rear vented
HE-Magnetic Gap Height mm (inch) 4 (0.16)
B-Flux Density (T) 0.83
BL Product/BXL 4.2
Max. Linear Ex./Xmax mm (inch) 7 ± 3.5mm (0.28 ± 0.14)
Suspension Compliance CMS - mm/N 0.78
Electrical Q Factor QES 0.59
QTS 0.45
QMS 1.8
Mech. Resistance RMS- N . S / M 1.96
Moving Mass MMS - gr/ounce 9.9
Equiv. Can Air Load VAS - L (cu.ft3) 8.87 (0.31)
Effective Piston Area SD sq.cm (sq.inch) 90 (13.95)
Cone Type One-piece formed
Cone Material DPC
Unit Diameter mm(inch) 135 (5.25)
Mounting Depth mm (inch) 60 (2.36)
Mounting Cutout 120 (4.72)
Net Weight Kg (lb) 0.60 (1.32)