Morel Elate Carbon MW9 9" Midbass Woofers

Morel Elate Carbon MW9 9" Midbass Woofers

Seen it cheaper? We will negotiate! Call Now!

SKU:ELATECARBONMW9

$2,899.00


In Stock
Add To Compare

Calculate Shipping

Standard Shipping - $0.00
Shipping with Signature

Overview

Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next-level performance in mind

These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.

Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion which translates to highly transparent and bass-rich sound reproduction.

Features

  • Nominal Impedance (ohm) 4: 4
  • Power Handling Wrms: 200 W
  • Max. Trans. Pwr Handling Wrms: 1000 W
  • Sensitivity (2.83 V/1M) dB: 89
  • Frequency response Hz: 25 - 3000
  • Voice Coil Diameter mm (inch): 75 (3)
  • Cone Type: One-piece formed

In the box

  • Morel ELATE CARBON MW9 woofers
  • Speaker grilles

(ELATECARBONMW9)

Specifications (Morel Australia)

Configuration Woofer
RMS Power 200
Peak Power 1000
Nominal Impedance 4 ohm
Sensitivity 89 dB
Frequency Resp. 25 - 3 kHz
Voice Coil Size 75 mm
Grills Included Yes

Manufacturer Specifications

Nominal Impedance (ohm) 4 4
Power Handling Wrms 200
Max. Trans. Pwr Handling Wrms 1000
Sensitivity (2.83 V/1M) dB 89
Frequency response Hz 25 - 3000
Resonant Freq. Fs Hz 44
Voice Coil Diameter mm (inch) 75 (3)
Voice Coil Height mm (inch) 14.50 (0.57)
Voice Coil Type/Former Titanium
Voice Coil Wire HexatechTM Aluminium
DC Resistance (ohm) 3.6
Voice Coil Induct. @1 kHz (mH) 0.615
Magnet System Double magnet rear vented
HE-Magnetic Gap Height mm (inch) 5 (0.20)
B-Flux Density (T) 0.74
BL Product/BXL 5.15
Max. Linear Ex./Xmax mm (inch) ±4.75mm (0.18)
Suspension Compliance CMS - mm/N 0.36
Electrical Q Factor QES 0.61
QTS 0.56
QMS 6
Mech. Resistance RMS- N . S / M 1.2
Moving Mass MMS - gr/ounce 30 (1.05)
Equiv. Can Air Load VAS - L (cu.ft3) 30.9 (1.1)
Effective Piston Area SD sq.cm (sq.inch) 219 (33.95)
Cone Type One-piece formed
Cone Material DPC
Unit Diameter mm(inch) 222 (8.75)
Mounting Depth mm (inch) 71 (2.80)
Mounting Cutout 192 (7.56)
Net Weight Kg (lb) 1.42 (3.13)