Morel Elate Carbon MW5 5.25" Midbass Woofers

Morel Elate Carbon MW5 5.25" Midbass Woofers

Seen it cheaper? We will negotiate! Call Now!

SKU:ELATECARBONMW5

$2,499.00


In Stock
Add To Compare

Calculate Shipping

Standard Shipping - $0.00
Shipping with Signature

Overview

Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next-level performance in mind

These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.

Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion which translates to highly transparent and bass-rich sound reproduction.

Features

  • Nominal Impedance (ohm) 4: 4
  • Power Handling Wrms: 160 W
  • Max. Trans. Pwr Handling Wrms: 1000 W
  • Sensitivity (2.83 V/1M) dB: 85
  • Frequency response Hz: 40 - 5000
  • Voice Coil Diameter mm (inch): 75 (3)
  • Cone Type: One-piece formed

In the box

  • Morel ELATE CARBON MW5 woofers
  • Speaker grilles

(ELATECARBONMW5)

Specifications (Morel Australia)

Configuration Woofer
RMS Power 160
Peak Power 1000
Nominal Impedance 4 ohm
Sensitivity 85 dB
Frequency Resp. 40 - 5 kHz
Voice Coil Size 75 mm
Grills Included Yes

Manufacturer Specifications

Nominal Impedance (ohm) 4 4
Power Handling Wrms 160
Max. Trans. Pwr Handling Wrms 1000
Sensitivity (2.83 V/1M) dB 85
Frequency response Hz 40 - 5000
Resonant Freq. Fs Hz 64.4
Voice Coil Diameter mm (inch) 75 (3)
Voice Coil Height mm (inch) 14.50 (0.57)
Voice Coil Type/Former Titanium
Voice Coil Wire HexatechTM Aluminium
DC Resistance (ohm) 3.6
Voice Coil Induct. @1 kHz (mH) 0.615
Magnet System Double magnet rear vented
HE-Magnetic Gap Height mm (inch) 5 (0.20)
B-Flux Density (T) 0.66
BL Product/BXL 5.15
Max. Linear Ex./Xmax mm (inch) ±4.75mm (0.18)
Suspension Compliance CMS - mm/N 0.35
Electrical Q Factor QES 0.63
QTS 0.56
QMS 4.15
Mech. Resistance RMS- N . S / M 1.32
Moving Mass MMS - gr/ounce 18 (0.63)
Equiv. Can Air Load VAS - L (cu.ft3) 4.5 (0.6)
Effective Piston Area SD sq.cm (sq.inch) 90 (13.95)
Cone Type One-piece formed
Cone Material DPC
Unit Diameter mm(inch) 135 (5.25)
Mounting Depth mm (inch) 60 (2.36)
Mounting Cutout 120 (4.72)
Net Weight Kg (lb) 1.05 (2.31)