Overview
The JBL Arena X is the flagship automotive loudspeaker from our Arena series. It is a 3-way system which will require active crossovers. The attractive grilles and innovative mounting rings allow for seamless, elegant installation with no visible fasteners.
Key Features
- 1-inch Edge-Driven Pure Beryllium dome tweeter: Beryllium offers 4.5 times the stiffness and three times more damping than more commonly used Aluminum and Titanium diaphragms, delivering extended high-frequency performance out to 40kHz
- Carbon fiber composite Cone Midrange and Woofers: The ultra-rigid carbon fiber dustcap and cone body minimize unwanted cone flexing, ensuring smooth frequency response
- Seamless perfect active speaker system: Seamless transducer integration design for use with high quality DSP to eliminate technical compromises, allowing for the use of delay, crossover parameters, and precise equalization to adjust for speaker placement, cabin acoustics and target response
- Die-Cast Aluminium Basket: Rigid support for the motor structure allows for tighter tolerances, yielding reduced distortion and acoustic anomalies
- Proprietary Acoustic Lens waveguide geometry tweeter: Ceramic-coated, cast-aluminum Acoustic Lens waveguide engineered to seamlessly integrate with the directivity of the companion midrange driver
- Nomex Spider Midrange and Woofers: Spider is specifically designed to ensure linear motion in both forward and rearward directions
- Neodymium Magnet Motor: Provides high flux density and allows more room for larger steel motor components, providing critical heatsink mass for the voice coil
- Bi-Amp Capable Precision Outboard Crossover network: High tolerance components are used to ensure purity and low distortion with a 12dB per octave alignment on the mid/woofer and 24dB per octave alignment on the tweeter
- 6-1/2" (165mm) 3-way active car component speaker system
- 1" Beryllium dome tweeter with 6th-generation ceramic-coated acoustic lens waveguide
- 3.5" Carbon fiber cone midrange with cast frames
- 6.5" Carbon fiber cone woofer with cast frames
What's Included
- 1 pair woofers
- 1 pair tweeters
- 1 pair midrange
- 1 pair woofer grille
- 1 pair midrange grille
- 1 pair woofer decoration ring
- 1 pair midrange decoration ring
- 1 pair tweeter plastic ring 1 fixture under tweeter
- 1 pair tweeter plastic ring 2 fixture around tweeter
- 1pair metal plate bracket
- 1 pair woofer gaskets
- 1 pair of midrange gaskets
- Screws bag
- User Manual
(JBL-ARENA-X)
- 1-inch Edge-Driven Pure Beryllium dome tweeter: Beryllium offers 4.5 times the stiffness and three times more damping than more commonly used Aluminum and Titanium diaphragms, delivering extended high-frequency performance out to 40kHz
- Carbon fiber composite Cone Midrange and Woofers: The ultra-rigid carbon fiber dustcap and cone body minimize unwanted cone flexing, ensuring smooth frequency response
- Seamless perfect active speaker system: Seamless transducer integration design for use with high quality DSP to eliminate technical compromises, allowing for the use of delay, crossover parameters, and precise equalization to adjust for speaker placement, cabin acoustics and target response
- Die-Cast Aluminium Basket: Rigid support for the motor structure allows for tighter tolerances, yielding reduced distortion and acoustic anomalies
- Proprietary Acoustic Lens waveguide geometry tweeter: Ceramic-coated, cast-aluminum Acoustic Lens waveguide engineered to seamlessly integrate with the directivity of the companion midrange driver
- Nomex Spider Midrange and Woofers: Spider is specifically designed to ensure linear motion in both forward and rearward directions
- Neodymium Magnet Motor: Provides high flux density and allows more room for larger steel motor components, providing critical heatsink mass for the voice coil
- Bi-Amp Capable Precision Outboard Crossover network: High tolerance components are used to ensure purity and low distortion with a 12dB per octave alignment on the mid/woofer and 24dB per octave alignment on the tweeter
- 6-1/2" (165mm) 3-way active car component speaker system
- 1" Beryllium dome tweeter with 6th-generation ceramic-coated acoustic lens waveguide
- 3.5" Carbon fiber cone midrange with cast frames
- 6.5" Carbon fiber cone woofer with cast frames
Specifications
| Brand | JBL |
|---|---|
| Model | Arena X |
| Frequency Response (-6dB) | 20Hz - 40kHz |
| Power Handling | 100Wrms,200W peak |
| Crossover Frequencies | 250Hz; 3.5kHz |
| Nominal Impedance | 4 ohms |
| Sensitivity | 90dB (2.83V @1M) |
| Woofer mounting depth | 2.83 in./72 mm |
| Midrange mouting depth | 1.47 in./37.5 mm |
| Tweeter flush mouting depth | 1.52 in./38.5 mm |



learn more>>


SSV Street Sound & Vision
Phone:
Mail: