Hertz MLPOWER4 Mille Power 1000W RMS 4 Channel D-Class Amplifier

The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The Hertzaudio car amplifier ML Power 4 (4 x 250 W 2 Ω) is the obvious choice for a top level front-rear Mille system.

Specifications:

• Channel mode: 4 - 3 - 2
• Output Power (RMS) @ 14.4 VDC 4 Ch 150 W x 4 (4Ω)
  • 4 Ch 250 W x 4 (2Ω)
  • 3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω)
  • 3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
  • 2 Ch 500 W x 2 (4Ω)
• Filters: 
  • Bypass: Yes
  • Hi-Pass:  A: 50 ÷ 5k @ 12 dB/Oct. - B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
  • Lo-Pass: A: 50 ÷ 5k @ 12 dB/Oct. - B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
• Distortion - THD (100Hz @ 4Ω): 0.08 %
• S/N Ratio (A weighted @ 1V): 100 dB
• Damping factor (100Hz @ 4Ω): 80
• Size W x D x H mm (in.): 170 x 289 x 46.70 (6.69' x 11.38' x 1.84')

Technologies:

• ADVANCED D-CLASS TECHNOLOGY - Ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. 
• LEDS STATUS DISPLAY - It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages. 
• HDP IN & ART(TM) - The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”. 
• ADVANCED HEATSINK - The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.