Hertz DBP12.3 Dieci Bass Pack with DP 2.200 Amp & DBX30.3 12" Sub Box

Hertz DBP12.3 Dieci Bass Pack with DP 2.200 Amp & DBX30.3 12" Sub Box

IN-STORE ONLY - Thomastown & Keilor Park stores

SKU:DBP12.3

In Stock
Add To Compare

Hertz DBP12.3 Dieci bass pack with a DP 2.200 Hi-Res 2-channel amplifier, DBX30.3 12" loaded subwoofer box, plus an 8 GA 2-channel amp install kit and 16 GA 4 m speaker cable. IN-STORE ONLY at our Thomastown and Keilor Park stores.

IN-STORE ONLY - available at our Thomastown and Keilor Park stores

This Hertz Dieci pack is not authorised for online sale. It is available to purchase at our Thomastown and Keilor Park stores. It should not be added to an online cart or listed on eBay.

Overview

The Hertz DBP12.3 is a Dieci bass pack that pairs a Hertz DP 2.200 Hi-Res 2-channel Class-AB amplifier with a Hertz DBX 30.3 12" loaded subwoofer enclosure. An 8 GA 2-channel amplifier install kit and 16 GA 4 m of speaker cable are included, as shown on the official pack carton (cable brand is not stated on the carton).

Official Hertz ratings are used below. The pack carton shows a 260 W figure for the DP 2.200, which matches Hertz's 10% THD bridged rating of 260 W x 1 at 4 ohm. The official 1% THD rating is 80 W x 2 at 4 ohm, 110 W x 2 at 2 ohm, or 220 W x 1 bridged at 4 ohm. The DBX 30.3 is a 12" 4 ohm single-voice-coil loaded enclosure rated 250 W continuous / 1000 W peak.

What's Included

  • 1 x Hertz DP 2.200 Dieci Power 2-channel Class-AB amplifier
  • 1 x Hertz DBX 30.3 12" loaded subwoofer box with grille
  • 1 x 8 GA 2-channel amplifier install kit (brand not stated on the official carton)
  • 16 GA 4 m speaker cable (brand not stated on the official carton)

Key Features

  • Complete Dieci bass upgrade: 12" loaded sub box, matching 2-channel amplifier and install wiring
  • DP 2.200: Hi-Res Class-AB 2-channel amplifier, fully bridgeable, 2 ohm stable, with speaker-level and RCA inputs, adjustable crossovers and bass boost
  • DBX 30.3: 300 mm (12") 4 ohm SVC loaded MDF enclosure with grille, 250 W continuous / 1000 W peak, 91 dB, 28–300 Hz
  • Very thick MDF cabinet with an angled rear wall for resonance control and easier fitment
  • IN-STORE ONLY at Street Sound & Vision Thomastown and Keilor Park

Important Information

  • IN-STORE ONLY - available at our Thomastown and Keilor Park stores.
  • Not authorised for online sale. Do not approve this product for the eBay, Kogan or Marketplace channels.
  • Professional installation is recommended.
  • The DBX30.3 sub box (Neto 40223) is also sold separately on the Street Sound & Vision site; this SKU is the complete bass pack with amplifier and wiring.
  • The official Hertz DP 2.200 technical table lists this amplifier as 2-channel. Some marketing sentences on the Hertz page say "4-channel"; the technical specifications and the pack carton (2-1 channel) are followed here.

(DBP12.3)

Covered by the manufacturer's Australian warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Contact Street Sound & Vision for warranty support.

  • IN-STORE ONLY at our Thomastown and Keilor Park stores
  • Hertz Dieci bass pack: 2-channel amp + 12" loaded sub box + wiring
  • Hertz DP 2.200 Hi-Res 2-channel Class-AB amplifier, 80 W x 2 @ 4 ohm (RMS, 1% THD)
  • Hertz DBX 30.3 12" 4 ohm SVC loaded sub box, 250 W continuous / 1000 W peak
  • 8 GA 2-channel amplifier install kit and 16 GA 4 m speaker cable included

Pack

Brand Hertz
Model DBP12.3
Type Dieci bass pack (amplifier + loaded 12" sub box + wiring)
Barcode 9317114957559
Availability IN-STORE ONLY — Thomastown and Keilor Park

Hertz DP 2.200 amplifier

Channels / Class 2-channel, Class-AB, fully bridgeable, 2 ohm stable
Output Power (RMS) @ 14.4 VDC, 1% THD 80 W x 2 (4Ω); 110 W x 2 (2Ω); 220 W x 1 (4Ω bridged)
Output Power (RMS) @ 14.4 VDC, 10% THD 95 W x 2 (4Ω); 130 W x 2 (2Ω); 260 W x 1 (4Ω bridged)
Bandwidth / S/N 10 Hz–50 kHz (Hi-Res certification states 10 Hz–45 kHz); 100 dBA
Inputs Pre-In (0.32–8 V) and Speaker-In (1.6–40 V), with ART remote turn-on
Crossovers / Bass boost Lo-Pass and Hi-Pass: Full / 50–4000 Hz, 12 dB/oct; bass boost 0–9 dB; full-range pre-outs
Supply / fuse 11–15 VDC / 1 x 20 A
Weight / size 1.95 kg; Dimension A 240 mm, E (height) 50 mm (official Hertz)
Source Official Hertz DP 2.200 product page

Hertz DBX 30.3 loaded subwoofer box

Type 300 mm (12") loaded enclosure, 4 ohm single voice coil, with grille
Power handling 250 W continuous / 1000 W peak
Frequency response / sensitivity 28–300 Hz; 91 dB
Voice coil / magnet / cone 38 mm (1.5") voice coil; high-density flux ferrite magnet; polypropylene cone with mica injection
Enclosure Thick MDF cabinet, angled rear wall, high-current plated terminals
Enclosure dimensions (official) A 484 mm (19 in); B 227 mm (8.9 in); C 343 mm (13.5 in)
Source Official Hertz DBX 30.3 product page