Call Now
Seen it cheaper? We'll match the price.
Aussie Owned
learn more>>
Fusion 010-02284-45 Apollo 4 Channel Marine Amplifier, 150 W RMS x 4
SKU:010-02284-45
Overview
The Fusion Apollo 4 channel marine amplifier (1200 W peak) produces strong, clean power with less drain on your battery. It can drive up to four pairs of speakers, or two pairs of speakers and one subwoofer, and comes with high power mode adapters for simple bridging.
Easy Tune automatically sets the amplifier's audio settings so you get the best sound without manual adjustment, and the design keeps distortion and noise low even at high volume. LED indicators show at a glance if there is a short or the amplifier is overheating.
Built to Fusion True-Marine standards, the amplifier has conformal-coated circuit boards, an ignition-protected design and has been tested against salt fog, temperature, vibration and UV. It is 2-ohm stable, so you can connect up to two speakers per channel, and the included bracket makes installation easy. Apollo amplifiers are designed exclusively for Fusion DSP-enabled stereos and are set up using the Garmin Audio app on a compatible smartphone.
Key Features
- Rated power: 150 W x 4 / 580 W x 2 bridged at 4 ohm; 290 W x 4 at 2 ohm
- 1200 W peak power, Class-D design for efficiency
- Easy Tune automatically optimises audio settings
- Low distortion and noise, even at higher volumes
- LED indicators for short-circuit and over-temperature status
- 2-ohm stable: up to two speakers per channel
- Conformal-coated PCBs and ignition-protected (SAE J1171) design
- Mounting bracket included
- For Fusion DSP-enabled stereos; setup via the Garmin Audio app
In the Box
- Apollo 4 channel amplifier
- Mounting bracket
- Power connector
- Two speaker connectors with high power mode adapters
- Four 8-gauge flat-head self-tapping screws
- Four 8-gauge pan-head self-tapping screws (for the bracket)
- Four screw covers
- Mounting template
- Installation instructions
Specifications
| Brand | Fusion |
|---|---|
| Model | 010-02284-45 |
| Manufacturer part number | 010-02284-45 |
| Product type | Marine amplifier |
| Channels | 4 Channel |
| Amplifier class | Class D |
| Peak power | 1200 W |
| Rated power (RMS, 14.4 V, 4 ohm, <1% THD) | 150 W x 4 / 580 W x 2 bridged |
| Rated power (RMS, 14.4 V, 2 ohm, <1% THD) | 290 W x 4 |
| Frequency response (+0, -1 dB) | 20 Hz - 20 kHz |
| Input sensitivity (RCA) | 1.3 V RMS |
| Input impedance | 22 kohm |
| Current consumption (max) | 53 A |
| Fuse | 85 A electronic fuse (no replacement needed) |
| Dimensions (H x W x D) | 180 x 235 mm x 45 mm |
| Weight | 2.2 kg |
| Water rating | IPX2 |
| Operating temperature | 0 to 50 °C |
| Ignition protected | Yes (SAE J1171) |
| Protection circuits | Reverse voltage, input under/over voltage, over temperature, output short circuit |
| Compatibility | Fusion DSP-enabled stereos (setup via Garmin Audio app) |
| Warranty | 3 years |
Warranty
3-year manufacturer's warranty. This product is covered by the manufacturer's Australian warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Contact us for warranty support.
(010-02284-45)
3-year manufacturer's warranty. This product is covered by the manufacturer's Australian warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Contact us for warranty support.
- Rated power: 150 W x 4 / 580 W x 2 bridged at 4 ohm; 290 W x 4 at 2 ohm
- 1200 W peak power, Class-D design for efficiency
- Easy Tune automatically optimises audio settings
- Low distortion and noise, even at higher volumes
- LED indicators for short-circuit and over-temperature status
- 2-ohm stable: up to two speakers per channel
- Conformal-coated PCBs and ignition-protected (SAE J1171) design
- Mounting bracket included
- For Fusion DSP-enabled stereos; setup via the Garmin Audio app
Specifications
| Brand | Fusion |
|---|---|
| Model | 010-02284-45 |
| Manufacturer part number | 010-02284-45 |
| Product type | Marine amplifier |
| Channels | 4 Channel |
| Amplifier class | Class D |
| Peak power | 1200 W |
| Rated power (RMS, 14.4 V, 4 ohm, <1% THD) | 150 W x 4 / 580 W x 2 bridged |
| Rated power (RMS, 14.4 V, 2 ohm, <1% THD) | 290 W x 4 |
| Frequency response (+0, -1 dB) | 20 Hz - 20 kHz |
| Input sensitivity (RCA) | 1.3 V RMS |
| Input impedance | 22 kohm |
| Current consumption (max) | 53 A |
| Fuse | 85 A electronic fuse (no replacement needed) |
| Dimensions (H x W x D) | 180 x 235 mm x 45 mm |
| Weight | 2.2 kg |
| Water rating | IPX2 |
| Operating temperature | 0 to 50 °C |
| Ignition protected | Yes (SAE J1171) |
| Protection circuits | Reverse voltage, input under/over voltage, over temperature, output short circuit |
| Compatibility | Fusion DSP-enabled stereos (setup via Garmin Audio app) |
| Warranty | 3 years |
SSV Street Sound & Vision
Phone: 
Mail:
