Focal Car Audio Speakers & Amp Pack ES165K | PC165FE | FPX4800 | SASK

Pack Includes: ES165K, PC165K, FPX4800

Focal ES 165K Elite Power Series 6-1/2" component speaker system

• component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
• K2 Kevlar sandwich woofer cone
• Tuned Mass Damper (TMD®) rubber surround
• 13/16" aramid fiber "M"-shaped inverted-dome tweeter
• 2-way external crossover with 3 tweeter level settings
• 4-ohm impedance
• power range: 6-100 watts RMS (200 watts peak power)
• frequency response: 60-22,000 Hz
• sensitivity: 90.8 dB at 2.83 V
• woofer mounting depth: 2-15/16"
• grilles included

FOCAL PC165FE 16.5CM (6”) 2-WAY COAXIAL KIT|
Equipped with the Flax cone, the woofers from the PC 165 FE kit deliver a very dynamic, natural sound without colouration. In addition, the TMD (Tuned Mass Damper) surround they incorporate stabilises the surround to achieve better control, and even greater neutrality and linearity. The ‘M’-profile inverted dome coaxial tweeter, in the centre of the speaker driver, offers greater sound definition, without directionality, for an even more detailed listening experience. Finally, with its engraved aluminium basket and meticulous finishes, PC 165 FE combines style, discretion and modernity for a premium installation in your vehicle.

Focal FPX 4.800 4/3/2 Channel Amplifier
The FPX 4.800 is a very compact 4-channel amplifier with a power of 4×120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.

InstalPro SASK Speaker Rings Bass Trim Acoustic Seal Kit car audio sound insulation
Speaker Accoustic Seal Kit Enhances the sound quality of any automotive loudspeaker installation by creating an acoustic barrier behind and around the Speakers Kit is for One Pair of Automotive Loudspeakers.

The package comprises three parts:

• (A) pads to go behind the speakers to absorb the backwave
• (B) sealing rings to seal the speakers to the metal door skin so that air doesn’t get past them
• (C) frontal barrier rings which seal between the speaker cones and the perforated door panels or grilles