Blaupunkt Chicago 600 Smart Multimedia Head Unit to suit Toyota 86

The Blaupunkt Chicago 600 is a strong choice for a Toyota 86 (2012–2021) because it is specifically designed as a 200mm "Toyota-fit" unit. Unlike standard Double DIN units that are 180mm wide and require side "ears" or spacers to fill the gaps in a Toyota dash, the Chicago 600 features a wide faceplate that sits flush with the factory dashboard opening.

Compatibility with Toyota 86

• Physical Fit: The unit’s 200mm panel is a direct physical match for the Toyota 86/Subaru BRZ dashboard.
• Harness: It typically comes with a Toyota-specific ISO harness, meaning it is largely "plug-and-play" for power and speakers in most 86 models.
• Steering Wheel Controls: The Chicago 600 supports Toyota’s analog steering wheel control (SWC) system directly, though you may need to map the buttons in the settings menu after installation.

Key Features

• Display: 6.75-inch capacitive touchscreen (800 x 480 resolution).
• PhoneLink: Supports smartphone mirroring. You can mirror your Android or iPhone screen via USB. Note that Android usually allows two-way touch control, while iPhone is generally mirroring only.
• Navigation: It is "Navigation Ready," meaning it has the hardware for GPS but may require an optional iGO Nextgen SD card for offline maps.
• Media: Includes a DVD/CD player, front and rear USB ports, and a microSD slot.
• Audio: 10-band parametric equalizer and 4 x 50W Max output.

Installation Tips for the Toyota 86

While the unit is "direct fit," keep the following in mind for a professional result:

• Fascia/Trim: Since the 86 dash is designed for a 200mm wide unit, you do not need a standard Double DIN fascia kit (like the Aerpro FP8301) unless you are installing the Chicago 600 into a 2017+ facelift model that has a non-standard integrated trim. For 2012–2016 models, it should slot right in.
• Reverse Camera: If your 86 has a factory reverse camera, you will likely need a 6-pin or 24-pin camera retention adapter (depending on your year) to convert the factory signal to the RCA input on the Blaupunkt.
• Antenna: Most Toyotas use a proprietary antenna plug; you may need a GT13 antenna adapter to connect the factory cable to the Blaupunkt’s standard DIN port.
• USB Retention: If you want to keep using the factory USB port in the center console, you'll need a Toyota USB retention cable.