Audison APK1652O Prima Line Component Speakers

APK 165 2OHM system features 2 crossovers dedicated to woofer and tweeter and separated, to ease the installation. APCX WF 2OHM crossover shapes AP 6.5 2OHM’s frequency response to match it optimally with AP 1 tweeter; it also employs a Low ESR inductor, essential to maximize the power transfer to the 2 OHM coil. APCX TW 2OHM tweeter crossover, instead, is provided with the Hi - Contour function, to enhance the high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.

Specification    

• Component 2 - way System
• Size mm (in.) Woofer 165 (6.5) Tweeter 26 (1)
• Power Handling
• 300W peak
• 100 W continuous
• Impedance 2 Ohm
• Frequency Response Hz 50 - 20k
• Crossover type Cut Off 4.5 / 5 kHz (Hi - Contour ON/OFF) - 6dB Oct. Component adjustment dB +2; 0
• Voice Coil mm (in.) Woofer 25 (1) Tweeter 20 (0.8)

Features    

• APK 165 2OHM 2 WAY SYSTEM
• 2 OHM impedance, to fully exploit the 65 W power per channel at 2 ohm of the AP8.9 bit amplifier
• 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
• 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
• 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.
• APCX WF 2 OHM, dedicated woofer crossover with low - loss voice coils to shape the frequency response for optimal match with the tweeter.
• APCX TW 2 OHM, tweeter crossover featuring the Hi - Contour function to enhance high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.
• AP 1 tweeter with acoustic lens designed to balance the frequency response in the 10kHz - 13kHz range, to optimize the products acoustic emission in the critical OEM placements, where the product performance is affected by the presence of the factory grille.
• Connection cable built in the passive crossover and ending with "OEM Integration compliant" fast - on connectors. The ends, different in each of the two poles, eliminate any possible connection errors, speeding up the installation process and making it safe in the course of time.
• AP 6.5 2 OHM woofer featuring water - repellent treated paper cone, with profile developed with FEM simulation technology and optimized with Klippel Scan Vibrometer.
• Woofer with reduced mounting depth, providing ease of installation in OEM placements.
• Woofer with TPU (Thermoplastic Polyurethane) surround, featuring the exclusive "Triple Wave" shallow profile, for maximum excursion linearity.
• Woofer with compact basket, protected by abrasion - resistant and scratch - proof coating. Damping epoxy glue provides perfect coupling with the motor system.
• Woofer with high current fast - on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature resistant plastic cover, protecting it against accidental short circuits.
• Developed with the KLIPPEL suite.
• Grille included Component 2 - way