Audison APBMWS84 Prima Line OEM Subwoofer

Subwoofers have been designed with electro - acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration. The 200 mm (8") APBMW S subwoofers allow a "direct replacement" of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8 - 2 with 2 ohm impedance and S8 - 4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid - high passive filtered system configuration, with the crossover provided, 4 of the 8 - channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8 - 4 installed under the seat. The S8 - 2 can be used in a fully active, multi - amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8 - 4 and S8 - 2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.

Specification    

• Component Woofer size mm (in.) 200 (8)
• Power Handling
• 300W peak
• 150W continuous
• Impedance 4 Ohm
• Frequency Response Hz 40 - 500
• Magnet size D x d x h mm (in.) 48 (1.89) x 18 (0.71) x 7 (0.28)
• Weight of one speaker kg (lb.) 1,21 (2.67)
• Voice Coil mm (in.) 50 (2)
• Mounting Depth 38mm

Features    

• Developed with electroacoustic parameters customized for BMW - Mini to increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box
• Neodymium Magnetic group with an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight
• 38 mm voice coil wound on aluminium support for a considerable power dissipation and stability even during high excursions
• Two 5 mm gaskets provided for OEM placements
• 4 ohm configuration for maximum output in combination with the AP 8.9 bit 4 channels bridged.