Aerpro SAGM07 InfoLink Adapter To Suit Holden Colorado, Trailblazer, Trax, Equinox, Barina & Astra 2017-on (Direct OEM Camera Retention)

Aerpro SAGM07 InfoLink Adapter To Suit Holden Colorado, Trailblazer, Trax, Equinox, Barina & Astra 2017-on (Direct OEM Camera Retention)

SKU:SAGM07

$399.99


In Stock
Add To Compare

Calculate Shipping

Standard Shipping - $0.00
Shipping with Signature

Retain steering wheel controls, vehicle menus, HVAC display, parking sensors and the factory reverse camera when fitting an aftermarket head unit to your 2017-on Holden with the Aerpro SAGM07 InfoLink adapter.

  • Retains steering wheel control functionality for seamless operation.
  • Provides on-screen access to vehicle menus, HVAC visualisations, and parking sensors.
  • Auto-detects reverse camera input (PAL/NTSC) for quick setup.
  • Supports reverse camera display (if equipped) for safer reversing.
  • Supports rear cross traffic alerts over reverse camera (model dependent)
  • Offers selectable dipswitch settings for simple configuration and installation.
  • Outputs for speed pulse, park brake, and reverse signals for enhanced system compatibility.
  • Multi-language support including English, German, Spanish, Italian, and French.
  • Software updateable for long-term reliability and performance.

To suit vehicle:

  • Holden Colorado 2017-2020
  • Holden Trailblazer 2017-
  • Holden Trax 2017- TJ
  • Holden Equinox 2017- EQ
  • Holden Barina 2017-2018 TM
  • Holden Astra 2017-2020 BL
  • Chevrolet Silverado 2014-2019

(SAGM07)

INTERFACE TYPE: INFOLINK

PATCH LEAD TYPE: SW

PHONE BUTTON COMPATIBILITY: YES

VOICE ASSISTANT BUTTON SUPPORT: YES

OUTPUTS:

  • REVERSE TRIGGER: YES (PURPLE/WHITE)
  • PARK BRAKE: YES (GREEN)
  • SPEED PULSE: YES (PINK)
  • ILLUMINATION: YES
  • AMP REMOTE: YES
  • TELEPHONE MUTE: NO

OTHER RETENTION:

  • OEM AMPLIFIER: NO
  • OEM REVERSE CAMERA: YES

NOTES:

  • Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
  • Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
  • Aftermarket headunit requires a rear camera input.
  • Not compatible with high-definition cameras
  • SWC Configuration: On first installation, steering wheel controls may operate incorrectly. To switch SWC mode, press the Track Down button 5 times quickly. The interface will then change to the correct configuration.
  • Do not plug the LIN-EXT into the video output of the SAGM07 Module