Aerpro LCCHRC01 Chime Retention Interface To Suit Chrysler, Jeep & Dodge

Overview

The Aerpro LCCHRC01 is a data interface for a number of Chrysler, Jeep and Dodge vehicles. When you install an aftermarket head unit it can retain accessory power, the factory reverse camera (if it was displayed through the original radio), the factory 3.5 mm AUX-IN jack, balance and fade, and the factory safety chimes.

It is designed for non-amplified vehicles, or for use when bypassing the factory amplifier. It also provides park brake, reverse trigger and speed-sense outputs for navigation. If the vehicle has steering wheel controls, a pre-wired AXSWC harness is included so an AXSWC module (sold separately) can be added.

Key Features

• To suit compatible Chrysler, Jeep and Dodge vehicles
• Retains accessory power (retained accessory power / R.A.P.)
• Provides 12-volt 10-amp accessory power
• Retains the factory reverse camera if it was displayed through the original radio
• Retains the factory 3.5 mm AUX-IN jack
• Retains balance and fade
• Retains factory safety chimes
• Park brake, reverse trigger and speed-sense outputs
• For non-amplified vehicles, or when bypassing a factory amplifier
• Pre-wired AXSWC harness included (AXSWC module sold separately) to retain steering wheel controls
• Micro-B USB updatable

What's in the Box

• Chime retention interface
• Pre-wired AXSWC harness (AXSWC module sold separately)

Important Information

• The official catalogue does not publish a model-by-model vehicle list for this interface. Please confirm it matches your exact Chrysler, Jeep or Dodge before purchase.
• For non-amplified vehicles, or when bypassing the factory amplifier. The factory reverse camera is retained only if it was displayed through the original radio.
• The AXSWC steering wheel control module is sold separately.

Specifications