Aerpro ASSU13C Steering Wheel Control Interface To Suit Subaru Impreza, XV, Forester, Outback & Liberty

Overview

The Aerpro ASSU13C is a CANBUS steering wheel control (SWC) interface for fitting an aftermarket head unit to selected Subaru models. It lets your factory steering wheel audio buttons keep working with a compatible SWC-ready head unit, so you can keep your hands on the wheel and your eyes on the road.

Along with the SWC module, the kit includes an antenna adaptor, retention adaptors for the factory reverse camera (including front and side cameras where fitted) and AUX retention leads. The harness uses a vehicle-specific plug that connects straight into the existing vehicle wiring, so the factory loom does not need to be cut. Reverse trigger and park brake output wires are also provided, along with an illumination output.

For a simpler install, Aerpro recommends pairing it with the Aerpro APP8 head unit secondary ISO harness (sold separately), which connects between the new head unit and the interface.

Key Features

• Keeps your factory steering wheel audio controls working with a compatible aftermarket head unit
• Retains factory front, side and rear cameras (if originally fitted) - the head unit needs an RCA reverse camera input
• Retains the factory AUX input (if originally fitted) - the head unit needs a rear RCA AUX input
• Includes an antenna adaptor that converts the vehicle antenna plug to a universal DIN plug
• Reverse trigger and park brake output feeds, plus an illumination output
• CANBUS interface with a vehicle-specific plug - no cutting of the factory wiring
• DIP switch setup for Aerpro, Alpine, Kenwood, JVC, Pioneer, Sony, Nakamichi and Android head units, plus a program mode
• Recommended to be installed with an Aerpro APP8 head unit secondary ISO harness (sold separately)

Vehicle Fitment

• Subaru Impreza 2017-on (GK, GT)
• Subaru XV 2017-on (GT)
• Subaru Forester 2018-on (SK)
• Subaru Outback 2018-2020
• Subaru Liberty (Legacy) 2018-2020

This interface suits standard (non-Harman Kardon) audio systems and supports factory front, side and rear cameras where they were originally fitted. Subaru models with a factory Harman Kardon amplifier use a different interface (Aerpro ASSU9C).

Important Information

• SWC interfaces vary between vehicle models - please confirm this interface matches your exact vehicle, factory audio system and camera setup before ordering.
• The aftermarket head unit must be steering wheel control compatible. Steering wheel control functions may differ from the factory functions.
• Factory camera retention (front, side and rear) only applies where the camera was originally fitted, and needs a head unit with an RCA reverse camera input.
• On Impreza, Forester and XV models, side cameras are displayed on the top cluster.
• This interface does not retain a factory amplifier or factory USB input.
• The Aerpro APP8 secondary ISO harness is recommended and sold separately.

Specifications

Warranty

Covered by the manufacturer's Australian warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Contact Street Sound & Vision for warranty support.