THINKWARE DASH CAM F770D Full HD 2CH Recording 64GB
THINKWARE DASH CAM F770D
Full HD 2CH Recording
Super Night Vision / Time Lapse
Road Safety Warning System / Safety Camera Alert
1080p Full HD & Full HD 2CH / 30fps / Advanced Video Clear Technology
Built-in Wi-Fi / Built-in GPS / DUAL SAVE® (Internal BackUp Memory)
VARIOUS AUTONOMOUS RECORDING MODES
Get in and go without having to worry about if your Thinkware Dash Cam is recording.
Thinkware Dash Cam's automatically switch recording modes depending on the vehicle is doing
Continuous Recording Mode
This mode is activated automatically when you start the car.
Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Event Recording Mode
The active impact monitoring system will automatically store the video data
10-seconds prior to and after a collision registered by the 3-axis G-Sensor,
saving a 20-second video into the designated Event Detection folder on the
memory card. No searching through hours of footage to find the right video. Easy.
Manual Recording Mode
By pressing the Manual Recording button your Thinkware Dash Cam
will capture events that occur in front of your vehicle whether or not it is in motion. Manual Recording Mode will save 10-seconds prior to and 50-seconds after the button press saving a 1-minute video into the designated Manual Recording folder on the memory card.
Parking Surveillance Mode*
Once your vehicle is turned off Thinkware Dash Cam will enter Parking Surveillance Mode,
combining impact detection with motion detection or time lapse (if supported)
*Parking Surveillance Mode requires the use the Hard Wiring Cable
Important parking surveillance clips and images may get deleted due to insufficient memory space during long recordings, especially with motion detection.
Time lapse in parking mode records 1 frame per second reducing the size of the video file. This allows video recordings to continue up to 30 times longer than our earlier models.
Note: Time Lapse only operates in parking mode. Parking mode requires use of the Hard Wiring Cable (HWC)
SUPER NIGHT VISION (SNV)
Super night vision employs new image signal processing technology and real-time image processing function to bring
up to 10 times brighter images than our earlier models when recorded with Super Night Vision in parking mode.
Note: Super Night Vision only operates in parking mode. Parking mode requires the use the Hard Wiring Cable (HWC)
Download recorded videos, change dash cam settings and conveniently update your dash cam on the go using your phone with the Thinkware Dash cam Mobile App
- no computer or cables needed.
It’s the fastest, easiest way to update your Dash Cam with the latest firmware for new features and optimal performance.
MOBILE VIEWER APP
The Thinkware Dash Cam Mobile Viewer is your convenient go-to-app for easy access to your Thinkware Dash cam. Simply pair your smartphone to your Thinkware Dash Cam over WiFi and connect to the Mobile Viewer app. Save the hassle of going back home to know what videos you have recorded, check them on your phone. Plus adjust the settings and preferences all through your smartphone.
COMPREHENSIVE DRIVING INFORMATION WITH GPS
With the GPS Tracker, Thinkware Dash Cams can record the vehicle's driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed, the time of a collision, and the severity of the impact.
The video recording feature not only stores driving footages in the case of an event, but it can also be used to track your holiday travel routes.
SAFETY CAMERA ALERTS*
Thinkware Dash Cams GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
Cultivate safe driving habits with THINKWARE DASH CAM.
RED LIGHT CAMERA WARNING
FIXED SPEED CAMERA WARNING
RED LIGHT & FIXED SPEED CAMERA WARNING
AVERAGE SPEED CAMERA WARNING
MOBILE SPEED CAMERA ZONE
STATE-OF-THE-ART VIDEO ENHANCEMENT
Thinkware Dash Cams are equipped with top-notch video enhancement technology, making sure you get the best video quality on the market,
and ensuring the most vivid video recordings under any circumstance.
WIDE DYNAMIC RANGE (WDR)
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings. The WDR function eliminates excessively bright spots on the recording to correct its color balance in order to ensure a clear image.
NIGHT TIME PICTURE QUALITY CORRECTION
Images from the videos recorded during night time driving on dark streets are generally difficult to make out. The enhancement Sensors of Thinkware Dash Cams come with a standard function of brightness and colour control as well as noise cancellation.
Night time picture correction takes control of brightness and colour as well as noise reduction to give you best possible picture in low-light environments.
INTELLIGENT AUTOMATIC EXPOSURE
A sudden rise of light exposure caused by strong sunlight or headlight beams of an oncoming vehicle may cause difficulties to assess the situation. Also, lack of lighting in a dark tunnel or night driving may pose the same problem. The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
ADAPTIVE COLOUR CORRECTION
Adaptive colour correction alters and enhances the colour of videos as they are recorded on Thinkware Dash Cams so you get the clearest most accurate image in all conditions.
ADAPTIVE CONTRAST CORRECTION
Adaptive contrast correction ensures your videos have deep blacks and vibrant whites so you can see all details. This helps you distinguish characters on license plates and road signs.
PC VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and easy-to-use interface of THINKWARE DASH CAM PC VIEWER allows you convenient access to your
recorded videos with G-sensor and GPS data such as speed and location. Compatible with both PC and Mac.
You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the PC Viewer.
ROAD SAFETY WARNING SYSTEMS
Thinkware Dash Cams feature a variety of advanced driver safety systems to help keep you safe on the road.
LANE DEPARTURE WARNING SYSTEM
Driving while drowsy or distracted greatly increases the chance of an accident on the road. The Land Departure Warning System will alert the driver when the vehicle goes out of the lane when travelling over 50 km/h.
FORWARD COLLISION WARNING SYSTEM (FCWS)
The FCWS function calculates the average distance from the vehicle in front and alerts the driver in advance when reaching the range of safe breaking distance in order to prevent a collision.
SOPHISTICATED IMPACT DETECTION
The X, Y, Z axes of the G sensor allow you to measure fluctuations in gravity, speed or rotation. You can figure out the axial movement and impact during an accident at a glance.
LED SECURITY LIGHT
Let people know they are being recorded with the LED security light. Designed as a visual deterrent to help prevent vandals from damaging your vehicle even while parked.
The LED security light can be enabled/disabled in the camera's system settings.
THE NEW STANDARD FOR DASH CAMS: DUAL SAVE
Dual Save technology is specially designed to save recorded footages in both the microSD memory card and the built-in internal memory in incident recording mode. It functions as a safeguard against the possible loss of data in the aftermath of a severe collision. In the event that the memory card gets damaged, the Dual Save Technology guarantees a backup copy of the video in the internal memory of the F770.
* The Dual Save Technology is activated when a specific level of impact is detected (The impact sensitivity is adjustable in the Dash Cam's settings).
In the event that the power gets disconnected after an accident, Thinkware Dash Cam's Fail-safe recording uses a Super Capacitor for backup power to ensure safe storage of any recording in progress – so you can be assured your valuable data will be securely stored under any circumstance.
THERMAL PROTECTION, CAUSE AUSTRALIA GETS HOT!
All THINKWARE Dash Cams feature Thermal Protection and are specially designed for efficient heat dissipation,
but if the extreme Aussie heat gets too much, a built-in thermal sensor protects the device and its data against intense heat by automatically turning it off to prevent overheating.
All Front and Rear Thinkware Dash Cams purchased in Australia are covered by a 2-year warranty from the date of purchase.
Please note: We do not offer any warranty or repair service on Thinkware Dash Cams or accessories purchased from outside of Australia. You must provide a copy of your proof of purchase if making a warranty claim.
2 year warranty offer extends to genuine Thinkware front, rear and cabin cameras only and does not include other accessories.
Australian warranty is offered by the Australian distributor of Thinkware Dash Cams, TDJ Australia.